Parabody 844 User Manual

1844 LAT OPTIONCLASS HPART # 7304901REV. ARevision: 06/19/02USER’S GUIDEWARNING:Read and follow all directionsfor each step to insure properassembly o

10STEP 7:FIGURE 7• Loop the LAT CABLE (11) around one 3-1/2” PULLEY (10) as shown in FIGURE 7.• LOOSELY assemble the 3-1/2” PULLEY (11) to the1-3/

STEP 8:FIGURE 8• Attach the LAT CABLE (11) to the CARRIAGE (7) using one 1/4” QUICK LINK (34) as shown in FIGURE 8. (IMPORTANT!Securely tighten QUIC

12STEP 10:FIGURE 10• Loop the LOW ROW CABLE (12) around one 3-1/2” PULLEY (10) as shown in FIGURE 10.• LOOSELY assemble the 3-1/2” PULLEY (10) t

STEP 12:FIGURE 12• Attach the LAT BAR (4) to the ball end ofthe LAT CABLE (11) using one SNAP LINK(33) as shown in FIGURE 12.. 41133• Slide two

FIGURE 15STEP 15:• When performing the LAT PULL exercise, insert the KNEE SUPPORT (6) into the hole of the SAFETY RAIL as shown inFIGURE 15 and

MAINTENANCEMODEL #________________________SERIAL #_________________________DATE OF PURCHASE: _____________DEALERS NAME: _________________DEALERS PHONE

16NOTES:LIMITED WARRANTYParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN

INTERNATIONAL OFFICESLife FitnessAtlantic BVAtlantic HeadquartersBijdorpplein 25-312992 LB BarendrechtThe NetherlandsPhone: (180) 646 666Fax: (180) 6

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OFEQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!1. Before using, read all the warnings and

IMPORTANT NOTESPlease note:Tools Required for Assembly* Thank you for purchasing the ParaBody 844 Lat Option. Please read these instructions thorou

4PARTS LISTPART #LEA6608709LEA6608509LEA6274410LEA6275310LEA6609010LEA6610410LEA6546310LEA6609309LEA3116101LEA3116201LEA6610501LEA6576201LEA6176201LEA

5FIGURE 2STEP 2:• SECURELY assemble the UPRIGHT (1) to the LOW PULLEY HOUSING (8) using two 1/2 X 3” BOLTS (24), two 1/2” WASH-ERS (25), and one 1/2

6STEP 4:FIGURE 4• CAREFULLY slide the CARRIAGE (7) over the UPRIGHT (1) as shown in FIGURE 4. 7 1FIGURE 3STEP 3:• Apply eight 1” SQ. GLIDES (31) t

CABLE DIAGRAM701234561/2 1/2 1/2 1/2 1/2 1/2

8• SECURELY assemble three 3-1/2” PULLEYS (10) to the TOP BOOM (2) using three 3/8 X 2-3/4” BOLTS (17), six 3/8”FLANGE SPACERS (22), and three 3/8”

901234561/2 1/2 1/2 1/2 1/2 1/2STEP 6:FIGURE 6• SECURELY assemble the TOP BOOM (2) to the UPRIGHT (1) using one 1/2 X 2-3/4” BOLT (23), one 1/2 X 3”